B01 Metering Wholesaler

HomeB01 Metering Wholesaler

B01 Metering Wholesaler

Metering activity carried out by the wholesaler



Items marked * must be filled in.

1. Retailer details


2. Eligible premises details

Address of eligible premises to be visited

Is the address of the meter at which the metering work is to be carried out the same as the address provided above?

Yes

No

If No, please provide details of the meter address below

Is there a Sensitive Customer at this eligible premises?

Yes

No


3. Metering work to be carried out

Please indicate the metering work to be carried out and complete the relevant section below.

Meter installation Please complete section 3.2

Meter accuracy test Please complete sections 3.1 and 3.3

Meter repair or replacement due to fault Please complete sections 3.1 and 3.4

Change of meter Please complete sections 3.1 and 3.5

3.1 Existing meter details

Please provide details of the existing meter (mandatory except for meter installation requests)


3.2 Meter installation (Please also fill in Appendix A Meter Size Data Assessment Sheet)


Proposed meter details

Proposed physical size 4 of the meter to be installed.

15mm

15mm

15mm

30mm

40mm

50mm

80mm

100mm

150mm

200mm

250mm

300mm

350mm

400mm

450mm

500mm

600mm

80?20mm

100?20mm

Other

Model of meter to be installed (from the Wholesaler's meter menu).

Standard

Non-standard

Please indicate the proposed location of the new meter.

Inside building

Outside building

To be determined on survey

Please provide a description of the proposed location (where available)

Please provide any additional information in relation to the request


3.3 Meter accuracy test

Please provide the reason for the meter accuracy test.

Meter suspected to be over recording usage

Meter suspected to be under recording usage

Other

Please provide details of the model of meter to be installed

Model of meter to be installed (from the Wholesaler's meter menu)

Standard

Non-standard

Please provide any additional information in relation to the request


3.4 Meter repair or replacement due to a fault or other issue with the meter

Please provide details of the suspected nature of the fault at the meter.

The meter has stopped recording

The meter has slowed

The meter is running backwards

There is a burst / leak at the meter

The meter is thought to be buried / tarred over but is still in situ

The meter cannot be read due to smashed dials

The meter cannot be read due to condensation

The meter cannot be read due to electrical/battery fault

Other

Model of meter to be installed (from the Wholesaler's meter menu).

Standard

Non-standard

Please provide any additional information in relation to the request

Are there any public health issues in relation to the request?

Yes Please complete section 3.4.1

No


3.4.1 Public health issues

Please confirm why this is a public health issue.

No water at the premises

Flooding at premises


3.5 Change of meter

Please indicate the reason for the change of meter.

Change to a meter of the same size Please complete section 3.2

Change to a smaller meter (downsize) Please complete sections 3.2 and 3.5.1

Change to a larger meter (upsize) Please complete sections 3.2 and 3.5.1

Change to the location of the meter (relocation) Please complete section 3.5.2


3.5.1 Meter resize requests (Please also fill in Appendix A ? Meter Size Data Assessment Sheet)

Please indicate if any additional information is supplied in support of the request.

Logging data

Other

Please provide any additional information in relation to the request


3.5.2 Meter relocation

Please indicate the proposed location of the new meter

Inside building

Outside building

To be determined on survey

Please provide a description of the proposed location where available


4. Consent to contact the Non-Household Customer

The Wholesaler may wish to contact the Non-Household Customer to arrange a visit to the premises. Please in dicate whether you give consent for the Wholesaler to contact the Non-Household Customer directly to arrange a visit to the premises.

YesPlease provide contact details below

No

Where consent is being given to contact the Non-Household Customer, please provide contact details below

Please indicate if you want to be notified of the date of any visit

Yes

No


5. Declaration

By submitting this form I accept the standard terms for metering activity in accordance with the Wholesaler?s Wholesale Tariff Document. If the activity is for a standard meter in standard circumstances as priced in the Wholesale Tariff Document then it will take place without a quote being issued, and may take place on the first visit.

I hereby acknowledge and declare that the information provided in this form is correct to the best of my knowledge and up to date at the date of submission

Your details

Appendix A ? Meter Size Data Assessment Sheet:

Please note this form is for use in assessing existing supplies and new supplies.


1. Site Information Details of all available data items should be completed
Meter 1 Meter 2 Meter 3 Meter 4
Size of any existing meters or the design standard for new meters; as defined by
-the value Q3 (in m3/hr),

- the ratio Q3/Q1, and

- the value DN.

Defined in BS EN ISO 4064-1:2014 Water meters for cold potable water and hot water. Metrological and technical requirements. (See note for older meters3).
Any existing meter serial numbers at the premises
Supply pressure (Bar) if known
Diameter of incoming pipe into building/premises (mm)
Fire supply (Y/N)
If YES, please complete section 4 ? Fire Supplies
Contaminated land (Y/N)
Operational time period:please select all time periods that apply

00:00 - 08:00;

08:01 - 12:00;

12:01 ? 18:00;

18:01 ? 24:00

If no time period is selected, 24 hours will be used as the default


2. Number of Water Fittings Please provide details of the number of water fittings (as listed) and indicate whether they are fed from the mains or from a storage tank. If no information is available, please complete section 3 ? Flowrate.
Meter 1 Meter 2 Meter 3 Meter 4
Storage tank supply pipe size (mm)
Maximum fill rate for storage tank l/sec
Mains Storage Mains Storage Mains Storage Mains Storage
WC flushing cistern
Domestic sized wash wash
Commercial sized wash basin
Bath (tap nominal size 20mm)
Bath (tap nominal size larger than 20mm)
Shower
Power shower
Sink (tap nominal size 15mm)
Sink (tap nominal size larger than 15mm)
Spray tap
Bidet
Domestic sized washing machine
Domestic sized dishwasher
Domestic sized waste disposal unit
Commercial sized washing machine
Commercial sized dishwasher
Commercial sized waste disposal unit
Outside tap
Swimming pool capacity m3 or max fill rate l/sec
Water re-use system
Water treatment unit
Any other water fitting or outlet
Description of plumbing work


3. Flowrate Where no information is available for the number of water fittings, please complete either section 3.1 or 3.2
Meter 1 Meter 2 Meter 3 Meter 4
3.1 Existing supplies
From Logging Data, if applicable

Please note that this is not applicable to new connections
Please provide details of all three flowrates requested
Minimum (l/sec)
Maximum (l/sec)
Typical (l/sec)
3.2 New supplies
Estimate of Flowrate
Please provide details for the daily water requirement
Daily requirement (l/day)
Estimate of maximum flow rate (l/sec)


4. Fire Supplies Please provide details for the number of fire supplies and their estimated flowrates. Fire supplies may not be metered.
Meter 1 Meter 2 Meter 3 Meter 4
Number of fire hydrants
Estimated flowrate (l/sec)
Mains Storage Mains Storage Mains Storage Mains Storage
Number of fire hoses
Estimated flowrate (l/sec)
Number of sprinkler system heads
Estimated Estimated (l/sec)
Fill rate for any tank if the fittings are not fed directly from the mains

5. Meter Requirements Please indicate whether there is power available at the site if a meter that requires power is being selected from the meter menu.
Meter 1 Meter 2 Meter 3 Meter 4
Power available (Y/N)

"